Work with the industrial high velocity fan, it allows the air to be distributed according to the planned configuration, quickly forming a complete ventilation system and providing even air supply.
Quick installation
The installation of the duct takes 20% less time than that of other materials, so it's very simple and easy to use.
Easy to clean
Can be washed in a washing machine, or disinfected with a non-chlorine disinfectant.
Fire retardant
The material of the textile fibers has been certified by an inspection center to be resistant to high temperatures and to prevent the occurrence of fire.
Dimension (unit: cm)
Fabric ducting matching diagram
| Model |
Fabric ducting length |
Fabric ducting matching diagram |
ITA-10G1
ITA-10L |
5M |
 |
| 10M |
 |
| 15M |
 |
ITA-14G1
ITA-14G3
ITA-14L |
10M |
 |
| 20M |
 |
| 30M |
 |
| 40M |
 |
| 50M |
 |
Installation
Suitable for installation in greenhouses, chicken barns, pigsties, factories, warehouses and parking lots.
Installation notice
1. Install fabric ducting and strap tensioner.
●Pull the tensioner handle at about 180 degrees, press the spring jaws and adjust the strap to the proper tightness.
●Attach the tensioner to the front of the fabric ducting outlet and open the handle of the tensioner.
●Completely cover the outside of the fan grill with fabric ducting.
●Shake the tensioner back and forth until the tensioner is fully locked and cannot be moved.
2. Ducting connections
●There are hooks on the fabric ducting, which can hanging on a column or other stable body.
●The AITA-F10M or AITA-F14M can be used to extend the length of the fabric ducting (Please refer to previous matching diagram)
●Zip up both ends of the fabric ducting and then attach the tensioner to the opening end of the ducting.
●Cover the entension fabric ducting to the outside of the fan grill.
3. Disassemble the fabric ducting and strap tensioner
●Press down on the spring jaw of the tensioner with the tip of your index finger and release the spring jaw by pulling the handle of the tensioner about 180 degrees close to flat.
●Then pull the strap outwards to release the tensioner and disassemble the fabric duct.
